Monday 9 December 2013

ARC Welder Jobs at Woodmans LLC Dubai

Job Title: ARC Welder

Organisation : Woodmans LLC

Location: Dubai
  

Job Requirements:
• A three-year post secondary non-degree course in Welding and Metal Fabrication Technology is needed to be a welder.
• Knowledge and can perform both basic and advance metal welding courses;
• Knowledge in Mathematics, Physics and Chemistry;
• Comprehension in non-destructive tests for welding;
• Analytical skills.


Job Duties:
• Perform welding from various departments with help of welding torches and arcs.
• Analyze defective equipments and identify appropriate defective equipments and inform supervisors.
• Administer various components and perform welding of clamps, holding and bolts according to specifications.
• Manage work with help of manual welding machines and melt metals for various processes.
• Monitor all welding processes and ensure absence of any shrinkage and distortion to materials.
• Manage welding work and ensure compliance to all specifications to perform defect work.
• Replace new and fabricate parts fir dump trucks and trailers.
• Ensure clean weld joint to obtain smooth look.
• Maintain disc grinder and perform all cleaning and grinding of metals.
• Operate various manual and automated welding equipments for welding work
• Analyze speed and length of welding arc for all welding process.
• Assemble all components with help of power and hand tools.


How to Apply:
Send resume to:
Email:    woodsmt@eim.ae

Closing Date: 22nd December 2013

Steel Fabricator at Woodmans LLC Dubai


Job Title: Steel Fabricator

Organisation: Woodmans LLC

Location: Dubai
  

Job Requirements:
• Should have mechanical skills
• A skill in welding, metallurgy and soldering is a must.
• Ability to interpret blueprints and technical drawings to correctly assemble products.
• A valid UAE Driving Licence


Job Duties:
• Operates fabricating machines, such as brakes, rolls, shears, flame cutters, and drill presses
• Bends and straighten metal by hammering, chipping and grinding it.
• Uses hand torch or furnace to pre-heat workpieces.
• Fits and welds metal parts together.
• Designs and creates templates and fixtures.
• Checks if a workpiece meets the specifications by using square, ruler, and measuring tape.
• May fabricate and assemble sheet metal products.
• May set up and operate machine tools associated with fabricating shops, such as radial drill press, end mill, and edge planer.


How to Apply:
Send resume to:
Email:    woodsmt@eim.ae

Closing Date: 23rd December 2013


Cost Controller Jobs in Dubai at Al Ghurair CEW

Job Title: Cost Controller

Organisation: Al Ghurair CEW

Location: Dubai
  

Job Requirements:
• With 3-5 years GCC experience
• Member of any Accounting Bodies such as CIMA, ACCA etc
• Good language skills English – written & spoken
• Good knowledge in computer software – Microsoft office
• Added advantage if with SAP knowledge
• Proactive, energetic and hardworking
• Ability to handle heavy workload and tight deadlines


Job Duties:
• Responsible to control and monitor project total expenditure including verifying and checking of invoices and claims from suppliers, vendors and subcontractors to ensure that all project expenditures are captured and properly recorded.
• Provide planning and cost controlling support for all projects which includes variation reporting, monitoring of milestone progress to the preparation of customer billing processes, etc
• Perform and manage project activity scheduling and monitoring
• Perform technical and commercial review of EPCI long time tenders (subcontractor’s quotations) for the preparation of Service agreements
• Ensure effective project implementation and utilize productive reports from the creation of WBS with the use of project management system to monitor the status of all purchases, invoicing and delivery up to the closure of the project.
• Prepare monthly vessel movement report for the monitoring of the vessel activities on a daily basis and register all downtime, consumptions and vessel related issues relating to the project promptly to the project manager and management.
• Coordinate and work with the project management team to resolve project issues to ensure the delivery/completion of the project work.
• Attend project meetings and discussions with the PMT and external clients
• Perform project costing related reporting to the team and management’s review on a monthly basis to ensure that expenditures are kept within the project budget.
• Provide cost control and planning advice to the internal PMT team as and when required.
• Undertake any other ad-hoc duties as required.

How to Apply:
Send resume to:
Email:    Info@agcew.ae

Closing Date: 22nd December 2013



QS Engineer Jobs at Al Ghurair CEW Dubai

Job Title: QS Engineer

Organisation: Al Ghurair CEW


Location: Dubai, United Arab Emirates


Job Requirements:
• With 3-5 years GCC experience
• B.Sc. / B.E. Civil Engineering,
• At least 5-10 yrs. exp. in a tendering department of a reputed construction company,
• Commitment
• Excellent verbal and written English
Independence
• Teamworking skills
• Strong numerical and IT skills


Job Duties:
• Preparing tender and contract documents, including bills of quantities with the architect and/or the client;
• Undertaking costs analysis for repair and maintenance project work;
• Assisting in establishing a client's requirements and undertaking feasibility studies;
• Performing risk and value management and cost control;
• Advising on procurement strategy;
• Identifying, analysing and developing responses to commercial risks;
• Preparing and analysing costings for tenders;
• Allocating work to subcontractors;
• Providing advice on contractual claims;
• Analysing outcomes and writing detailed progress reports;
• Valuing completed work and arranging payments;
• Maintaining awareness of the different building contracts in current use;
• Understanding the implications of health and safety regulations.


How to Apply:
Send resume to:
Email:    Info@agcew.ae

Closing Date: 22nd December 2013

Junior Accountant Jobs at Abdullah Haider General Trading in Dubai


Job Title: Junior Accountant

Organisation: Abdullah Haider General Trading

Location: Dubai, United Arab Emirates



Job Description:

Abdullah Haider General Trading Seeks a Junior Accountant in Dubai.

. Must be on visit visa
Maintains financial records for subsidiary companies by analyzing balance sheets and general ledger accounts.
Reconciles general and subsidiary bank accounts by gathering and balancing information.
Provides financial status information by preparing special reports; completing special projects.
Corrects errors by posting adjusting journal entries.
Maintains general ledger accounts by reconciling accounts receivable detail and control accounts; adjusting entries for amortizations prepaids; analyzing and reconciling retainage and accounts payable ledgers; preparing fixed asset depreciation and accruals.
Secures financial information by completing database backups; keeping information confidential.
Maintains accounting controls by following policies and procedures; complying with federal, state, and local financial legal requirements.

Job Qualifications
Junior accountant with minimum speed of 60 words per minute for data entry of PO, DO and Invoices
Bachelors in Accounting

How to Apply:

Email Cv to: accounts@dubaiinstruments.com

Closing Date: 21st December 2013


Motorbike Mechanic Jobs in Dubai at Al Badayer Motorcycles Trading

Job Title: Motorbike Mechanic

Organisation: Al Badayer Motorcycles Trading

Location: Dubai, United Arab Emirates



Job Requirements:
• Must be English & Arabic speaking
• At least a High School Diploma or equivalent qualification.
• You must have good practical skills and a high level of technical knowledge.
• You need to be physically fit to cope with bending, lifting and stretching,
• You will need nimble fingers to handle small parts and hand tools.

Abilities/Skills:
• Diagnostic Abilities
• An Array of Integrated Skills
• The Ability to Stay Prepared
• The Ability to Teach Others


Job Duties among others:
• Dismantle engines and repair or replace defective parts, such as magnetos, carburetors, and generators.
• Remove cylinder heads, grind valves, and scrape off carbon, and replace defective valves, pistons, cylinders and rings, using hand tools and power tools.
• Hammer out dents and bends in frames, weld tears and breaks; then reassemble frames and reinstall engines.
• Repair or replace other parts, such as headlights, horns, handlebar controls, gasoline and oil tanks, starters, and mufflers.
• Repair and adjust motorcycle subassemblies such as forks, transmissions, brakes, and drive chains, according to specifications.
• Replace defective parts, using hand tools, arbor presses, flexible power presses, or power tools.
• Reassemble and test subassembly units.
• Disassemble subassembly units and examine condition, movement or alignment of parts visually or using gauges.
• Listen to engines, examine vehicle frames, and confer with customers in order to determine nature and extent of malfunction or damage.

How to Apply:
Send your CV to:
Email:    info@albadayertrading.com

Closing Date: 20th December 2013



Jobs at Premier Car Care Dubai - Auto Painter


Job Title: Auto Painter

Organisation: Premier Car Care

Location: Dubai, United Arab Emirates
  
Salary:
AED 2,500 - 3,500 per month

Job Requirements:
• Must have 2-3 years' experience in servicing and repairing different cars.
• Body Repair experience within a reputable company
• Ability to operate basic body and paint tools and equipment (i.e. mig welding, washer welding, frame aligner, etc.)
• Ability to speak write and read English.
• A valid UAE Driving Licence
• Good hand-eye coordination
• Normal colour vision
• Able to stand or bend for lengthy periods.


Job Duties:
• Prepare surfaces to be painted by hand or machine
• Mix and match paint by eye or by using computer technology to ensure correct colour match
• Apply primer and finishing coats using spray guns and rub down surfaces between coats
• Touch up paintwork and apply polish to vehicles
• Remove masking papers before waxing and polishing finished paintwork
• Paint signs or artwork on vehicles
• Treat vehicles with rust-proofing chemicals.

Visa will be provided and benefits as per labor law.

How to Apply:
Send your CV to:

Closing Date: 25th December 2013



Site Engineer Jobs at Al Ghurair CEW in Dubai

Job Title: Site Engineer

Organisation: Al Ghurair CEW

Location: Dubai, , United Arab Emirates

Job Requirements:
• A Bachelor Degree in Engineering is required.
• With 3-5 years GCC experience.
• A valid UAE driving license is essential.

Job Duties:
• Managing construction projects.
• Ensuring equipment and procedures comply with safety regulations.
• Overseeing building work.
• Surveying sites.
• Making sure budgets, timescales and project specifications are met.
• Solving problems and providing technical advice.
• Checking and preparing site reports, designs and drawings.
• Liaising with other engineers, surveyors, clients and sub-contractors.
• Planning the work to be done and organise things so that deadlines are met.
• Resolving technical problems that arise at the site.


How to Apply:
Send your CV to:
Email:    Info@agcew.ae

Closing Date: 22nd December 2013



QC Engineer at Al Ghurair CEW in Dubai

Job Title: QC Engineer

Organisation: Al Ghurair CEW

Location: Dubai, United Arab Emirates


Job Requirements:
• A Bachelor Degree in Engineering is required.
• With 3-5 years GCC experience.
• A valid UAE driving license is essential.

Job Duties:
• Organize, implement, conduct and manage the QA/QC Programs as per the Company's Quality Policy.
• Coordinate the document controls of technical submittals, drawings, etc with the Project Team and to ensure that the QA/QC validation has been done, to ensure their issue, amendments and recall of controlled documents.
• Coordinate all inspections, monitor the required tests and record inspections and tests made pas the Contract Plan and Contract Specifications.
• Liaise with the Client's representatives for the conduct of day-to-day quality related project activities.
• Coordinate with the Project Manager regarding work performance and hold authority to stop work in any area where discrepancies remain uncorrected and/or cancel the stop work order upon satisfactory correction of noted deficiencies.
• Provide technical support to the Project Manager and guidance to site staff in submission of materials for approval, request for inspection, shop drawings, As-built drawings, O & M manual.
• Assist QA/QC Manager in conducting internal quality audits.
• Ensure that Non-Conformance Report (NCR) are raised once the activities deviated from the Contract Specifications or normal construction industry practices.
• Coordinate with the project staff to compile and maintain pertinent records of inspection and testing until end of the contract and all pertinent records for retention on completion of the project.
• Attend Monthly Project Review Meetings (PRM) and alert the project team of any potential problems.

How to Apply:
Send your CV to:
Email:    Info@agcew.ae

Closing Date: 24th December 2013